Horizontal Foam Balers
Warranty
The Horizontal balers carry a warranty of one year on Parts and Labor. Certain conditions may apply.
Installation
Our Driver/Installer secures and preps the baler.
Service
- We provide a dedicated 800 number.
- We provide service trucks and factory trained technicians.
- We provide over 300 hydraulic service repair centers.
- We provide the end user with total access to replacement parts.
More Horizontal Closed End Balers:
Viper Baler • Horizontal Closed End Baler • Horizontal Foam Baler
Specifications
| Baler Model (Feed Opening) |
Bale Size | Bale Wt. Lbs. |
Cycle Time No Load |
Motor | Pump | Cylinder | System Pressure |
Ram Pressure |
Platen Pressure |
Oil Capacity |
Approx. Ship Wt |
| HCE 3060 F (30x72) |
30X36x60 | Up to 1300 | 19.99 sec | 30hp 230/460v 3ph |
52.5 GPM | 7" Bore 5" Rod 105" Stroke |
2600 psi | 100,060 lbs | 105 psi | 150 Gal | 16,000 lbs |
| HCE 3660 F (36x72) |
36X36x60 | Up to 1450 | 19.99 sec | 30hp 230/460v 3ph |
52.5 GPM | 7" Bore 5" Rod 105" Stroke |
2600 psi | 100,060 lbs | 86.56 psi | 150 Gal | 17,000 lbs |
| HCE 4860 F (48x72) |
48X36x60 | Up to 1500 | 26 sec | 30hp 230/460v 3ph |
52.5 GPM | 8" Bore 5.5" Rod 105" Stroke |
2600 psi | 130,690 lbs | 83.56 psi | 150 Gal | 25,000 lbs |
Measurements (Inches)
| Baler Model | A | B | C | D | E | F | G | OAL with Door Open |
H | I | J |
| HCE 3060x72F | 36.5 | 47.75 | 44.5 | 63.5 | 73 | 285.5 | 294 | 335 | 95.5 | 81 | 164 |
| HCE 3660x72F | 42.5 | 53.75 | 44.5 | 63.5 | 73 | 285.5 | 294 | 341 | 95.5 | 81 | 164 |
| HCE 4860x72F | 61.5 | 72.75 | 44.5 | 63.5 | 73 | 285.5 | 294 | 353 | 95.5 | 81 | 164 |
- In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications without notice.
- Performance may vary application.
- Products must be installed and operated according to required standards, codes, regulations and safety procedures.
- All equipment is provided with A-36 structural steel frames. A-514 reinforced in areas of high stress. Strong rigid container walls provide performance and long service life. A-1018 is used for gib bar, guide and control surfaces.
- All equipment meets or exceeds all ANSI Z245.5 and OSHA standards.
- All equipment has NEMA 12 and UL approved electrical panel and control assembly.
- We offer several lines of equipment for your recycling needs: Vertical Balers, Horizontal Closed End Balers, Horizontal Open End Balers, Full-Eject Balers, Compactors, Containers, Conveyors and Trailers.
More Horizontal Closed End Balers:
Viper Baler • Horizontal Closed End Baler • Horizontal Foam Baler