Compactors
Designed and built by people with 25 years of experience in baling and transporting materials for recycling.
Standard Features
- Key Start - Push Button - Control Station mounted on 15' Sealite
- Right or left side mounted power unit
- Power unit weather cover
- NEMA 4 weather proof gasket control panel
- UL listed control panel
- Override - packout - hydraulic pressure boost
Options
- Additional keyed start/stop remote push button station on 15' Sealite
- 75% full advanced warning light
- 575 volt motor
- Multi-cycle timer
- Low oil / high temp light
- 3-sided hopper (left or right feed)
- 4-sided top hopper
- 5' guide island
- Walk / drive-on dock mounts with 42" hopper & island rails
- Walk / drive-on dock mounts with safety gate hopper & hand rails
Specifications
| MP200HD | MP300HD | MP400HD | MP500HD | |
| Charge Box Capacity | 2yd | 3yd | 4yd | 5yd |
| Clear Top Opening | 40.5x60 | 50x60 | 65x60 | 85x60 |
| Cycle Time | 57 sec | 60 sec | 60 sec | 80 sec |
| Total Force Normal | 47,600 | 47,600 | 64,600 | 64,600 |
| Total Force Maximum | 56,000 | 56,000 | 76,000 | 76,000 |
| Total Face Pressure Normal | 27 psi | 27 psi | 36 psi | 36 psi |
| Ram Face Pressure Maximum | 31 psi | 31 psi | 43 psi | 43 psi |
| Ram Penetration | 14" | 14" | 14" | 14" |
| Motor | 10hp | 15hp | 15hp | 20hp |
| Cylinder Bore | 6" | 6" | 7" | 7" |
| Cylinder Stroke | 55" | 65" | 80" | 100" |
| Cylinder Rod | 2.5 | 3.5 | 4.5 | 4.5 |
| Operating Pressure Normal | 1700 psi | 1700 psi | 1700 psi | 1700 psi |
| Operating Pressure Maximum | 2000 psi | 2000 psi | 2000 psi | 2000 psi |
| Unit Weight | 4100 lbs | 5800 lbs | 7500 lbs | 12,000 lbs |
| Construction: Floor | 1/2" Plate | 1/2" Plate | 1/2" Plate | 3/4" Plate |
| Sides | 1/4" Plate | 1/4" Plate | 1/4" Plate | 3/8" Plate |
| Breaker Bar | 8x6x1 Angle | 8x6x1 Angle | 8x6x1 Angle | 8x6x1.5 Angle |
| Ram Face | 1/2" Plate | 1/2" Plate | 3/4" Plate | 3/4" Plate |
| Ram Top | 1/4" Plate | 1/4" Plate | 1/4" Plate | 3/8" Plate |
| Ram Sides | 1/4" Plate | 1/4" Plate | 1/4" Plate | 3/8" Plate |
| Ram Bottom | 1/2" AR Plate | 1/2" AR Plate | 1/2" AR Plate | 1/2" AR Plate |
Measurements
| Model | A | B | C | D | E |
| MP200HD | 55 | 52 | 117 | 69 | 78 |
| MP300HD | 55 | 61.5 | 136 | 69 | 78 |
| MP400HD | 55 | 76.5 | 179 | 69 | 78 |
| MP500HD | 55 | 96.5 | 220 | 69 | 78 |
- In order to provide the most currently engineered and designed equipment, we reserve the right to change specifications without notice.
- Performance may vary application.
- Products must be installed and operated according to required standards, codes, regulations and safety procedures.
- All equipment is provided with A-36 structural steel frames. A-514 reinforced in areas of high stress. Strong rigid container walls provide performance and long service life. A-1018 is used for gib bar, guide and control surfaces.
- All equipment meets or exceeds all ANSI Z245.5 and OSHA standards.
- All equipment has NEMA 12 and UL approved electrical panel and control assembly.
- We offer several lines of equipment for your recycling needs: Vertical Balers, Horizontal Closed End Balers, Horizontal Open End Balers, Full-Eject Balers, Compactors, Containers, Conveyors and Trailers.